Creation of the first layer of the cinder block fire pit smokehouse. Use five cement blocks. The rear of the smokehouse consists of a block of ash in a horizontal position. Place two blocks of ash along the length of each side of the center block. Insert a 1/8-inch; this will lift the front unit in the next layer.
Step By Step Make Cinder Block Fire Pit
Create the second layer by placing cinder block fire pit on the first layer of blocks. Insert two concrete blocks on the front, on the lintel of metal, width. Third layer forms the smokehouse by square concrete blocks over the second layer. Place a block in the widthwise half of the back, with two running another in the longitudinal direction along the sides. Repeat step 3 and 4 to form of blocks.